 |
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
|
|||||
 |
 |
 |
 |
|
||||||||
 |
|
|||||||||||
| 15-October-2008 Rubber Lined Slurry Spools for Goro Nickel |
|
Trelleborg is currently supplying Goro Nickel with 173 rubber lined pipe
spools for Goro's cobalt & nickel mine in New Caledonia. Once installed,
the rubber lined spools will extend for over 1.5 kms and is designed to |
 |
| 30-July-2008 Elastoseal installed in Albany, WA |
|
The Water Corporation of Western Australia recently selected Elastoseal EPDM Membrane to line a channel at a capacity upgrade at its Albany Wastewater Storage Dam. Click Here for a Case Study in PDF….. |
 |
| 10-April-2008
New Dry Heat Autoclave installed at Brisbane Factory |
|
Trelleborg in Brisbane have installed a new dry heat autoclave clearly
focused on producing special
|
 |
| 15-February-2008 FLEXIDAM - Rubber Dam installed in Indonesia Ready for Monsoon Season |
|
PT Newmont Nusa Tenggara, a large copper mine in Indonesia, installed
a Trelleborg Flexidam to raise the storage capacity of the Tongoloka
on-site water storage reservoir. The rubber dam is 47 metres long and
raises the level of the existing spillway by 1.5 metres. The dam was
supplied with all pipework and control systems prepackaged for easy site
installation in this remote location and commissioned on site by
Trelleborg technicians with the assistance of the PT Newmont personnel.
Installation was completed just in time for the monsoons in December 07. Contact: Bruce Cage
|
|
| 15-March-2007 TRELLSKIRT - the patented new CONVEYOR SKIRTING SYSTEM |
|
Trelleborg have designed & developed a simple two part system , comprising a metallic hanger , mounted to the Chutewall , together with a fully Moulded Rubber Skirting that is available in many sizes , gauges & compounds. There are many benefits - no nuts , bolts or clamping systems , merely tap the Rubber into the hanger! Installation & maintenance is simple & safe. TRELLSKIRT really does take the nuts & bolts out of Skirting Systems!! |
|
| 12-Feb-2007 Trelleborg River Wall Installed in Brisbane |
|
The South Brisbane Dry Dock was constructed in 1876 and is 430ft long and 60ft wide. The use of the dock by ships fluctuated during the years subject to economic conditions and improvements in land transport. The dry dock closed in 1972 and converted to a Maritime Museum opening in 1979 and HMAS Diamantina was placed in the dry dock in 1981. In 1998 the caisson failed and the dock flooded lifting Diamantina clear of its keel blocks. The Queensland Government undertook a project to replace the caisson with a river wall in July 2005. The Diamantina is now resting on new keel blocks in the dry dock and the Museum now conducts guided tours of the bottom of the dry dock. The new river wall was constructed by J. F. Hull Holdings and was completed in September 2006. The rubber seals were manufactured by Trelleborg Queensland Rubber Pty Contact: John Mosel |
|
| 12-Feb-2007 Trelleborg Successful in New Zealand |
|
| Trelleborg Queensland Rubber was successful in winning the order for the supply of the very large pot bearings required for the Waiwera Viaduct.The northern motorway extension from Orewa and Puhoi comprised of 7.5 km of road with twin tunnels, five bridges, two smaller viaducts and one 520 metre long viaduct at Waiwera. The customer was an alliance comprising Transit N.Z. , Fulton Hogan, Leighton Contractors and URS as engineering consultants.
Because of the extremely difficult geological conditions and the usual high seismic activity in the region, the bearings demanded very critical performance as well as high shear performance under seismic conditions. The SLS varied over the sixteen bearings from 6140kN on one abutment to 21000kN on one of the central piers. Critical corrosion protection requirements were also demanded because of the estuarine location. |
|
| 12-Feb-2007 Trelleborg Expands into Mining |
|
| Trelleborg has recently supplied all the rubber required within the huge 240 tonne Car Dumpers for the Hammersley Iron , Dampier Port Upgrade. Rubber for skirts, impact areas , beams & shrouds was fabricated for Monadelphous as a part of the huge expansion within the Iron Ore Industry in Western Australia. Contact: Bruce Bernhardt |
 |
| 15-June-2006 Trellagging Now in Australia |
|
Trelleborg in Australia now has stock of the Trellagging Self Cleaning Pulley Lagging System. Made from our highly successful and hard wearing T Line 60 material Trellagging is able to be mechanically attached to any conveyor pulley using M10 screws without the requirement to remove the pulley from your conveyor system. The easy to fit and self cleaning features makes Trellagging an ideal solution for those awkward to access situations. |
 |
| 10-June-2006 QRDS Marine Fendering System Updated The new, easy to fit QRDS marine fendering system looks terrific and is very easy to install on water edge structures and boats. The aluminum mounting strip is either welded or screwed to the jetty, pontoon or boat and then the fender slipped into place. Available standard colours are grey and black and special colours of Orange, blue, yellow and cream. Contact: Victor Gandolfo |
 |
| 26-May-2006 Trelleborg Mining Supplies BHP Billiton for Ravensthorpe Project BHP Billiton's giant $2.4 billion Ravensthorpe Nickel laterite project in Western Australia is now 40% into the construction phase , with production scheduled for the second quarter of 2007. Outokumpu provided the packaged supply of the Limonite & Saprolite Scrubbers within which Trelleborg Mining, manufactured the entire Discharge Cone Assemblies. This includes the steelwork fabrication together with the all the associated Rubber Wear Components." |
 |
